oqapi/webgui
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Used B<> instead of C<> when highlighting options and parameters in

Browse source 
POD documentation. Not only do they look nicer emboldened, but it's
also what's suggested in perlpod.
This commit is contained in:
Ernesto Hernández-Novich 2008-06-09 14:54:08 +00:00
parent 112da861ca
commit fd671cec3d
16 changed files with 179 additions and 179 deletions
Download patch file Download diff file Expand all files Collapse all files

18
sbin/changeIobStatus.pl
View file

@ -129,47 +129,47 @@ already marked out.
=over
=item C<--configFile config.conf>
=item B<--configFile config.conf>
The WebGUI config file to use. Only the file name needs to be specified,
since it will be looked up inside WebGUI's configuration directory.
This parameter is required.
=item C<--currentStatus status>
=item B<--currentStatus status>
Check users in the IOB having B<status> status. If left unspecified,
it will default to C<In>.
=item C<--newStatus status>
=item B<--newStatus status>
Change users status in the IOB to B<status> status. If left unspecified,
it will default to C<Out>.
=item C<--userMessage msg>
=item B<--userMessage msg>
Text of the message to be sent to the user after changing the status.
If left unspecified it will default to
You were logged out of the In/Out Board automatically.
=item C<--userMessageFile pathname>
=item B<--userMessageFile pathname>
Pathname to a file whose contents will be sent to the user after changing
the status. Using this option overrides whatever messages is set
with C<--userMessage> (see above).
with B<--userMessage> (see above).
=item C<--whatsHappening text>
=item B<--whatsHappening text>
The message attached to the InOut Board when changing status. If left
unspecified it defaults to
Automatically signed out.
=item C<--quiet>
=item B<--quiet>
Disable all output unless there's an error.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

30
sbin/diskUsage.pl
View file

@ -148,47 +148,47 @@ utility.
=over
=item C<--configFile config.conf>
=item B<--configFile config.conf>
The WebGUI config file to use. Only the file name needs to be specified,
since it will be looked up inside WebGUI's configuration directory.
This parameter is required.
=item C<--assetId id>
=item B<--assetId id>
Calculate disk usage starting from WebGUI's Asset identified by C<id>.
Calculate disk usage starting from WebGUI's Asset identified by B<id>.
If this parameter is not supplied, calculations will start from
WebGUI's default page as defined in the Site settings.
=item C<--assetUrl url>
=item B<--assetUrl url>
Calculate disk usage starting from the particular URL given by C<url>,
which must be relative to the server (e.g. C</home> instead of
C<http://your.server/home>). If this parameter is not supplied, calculations
Calculate disk usage starting from the particular URL given by B<url>,
which must be relative to the server (e.g. B</home> instead of
B<http://your.server/home>). If this parameter is not supplied, calculations
will start from WebGUI's default page as defined in the Site settings.
=item C<--blockSize bytes>
=item B<--blockSize bytes>
Use C<bytes> as scaling factor to change the units in which disk space
will be reported. If this parameter is not supplied, it defaults to C<1>,
Use B<bytes> as scaling factor to change the units in which disk space
will be reported. If this parameter is not supplied, it defaults to B<1>,
hence the results will be expressed in bytes. If you want to have kb,
use C<--blockSize 1024>.
use B<--blockSize 1024>.
=item C<--norecurse>
=item B<--norecurse>
Prevent recursive calculation of disk space. This effectively computes
the used disk space for the starting Asset only, without including
its descendants.
=item C<--quiet>
=item B<--quiet>
Just display the total amount of disk space as a raw value.
=item C<--summary>
=item B<--summary>
Just display the total amount of disk space in a human readable format.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

46
sbin/fileImport.pl
View file

@ -343,84 +343,84 @@ attached to a specified parent Asset, helping bulk uploads of content.
This utility is designed to be run as a superuser on Linux systems,
since it needs to be able to put files into WebGUI's data directories
and change ownership of files. If you want to run this utility without
superuser privileges, use the C<--override> option described below.
superuser privileges, use the B<--override> option described below.
=over
=item C<--configFile config.conf>
=item B<--configFile config.conf>
The WebGUI config file to use. Only the file name needs to be specified,
since it will be looked up inside WebGUI's configuration directory.
This parameter is required.
=item C<--pathToFiles path>
=item B<--pathToFiles path>
Path to a folder containing the files to import. This parameter is required.
=item C<--parentAssetId id>
=item B<--parentAssetId id>
Attach the imported files to the Asset C<id> in WebGUI's Asset Manager.
Attach the imported files to the Asset B<id> in WebGUI's Asset Manager.
This parameter is required.
=item C<--groupToEdit id>
=item B<--groupToEdit id>
Make members of WebGUI's group identified by C<id> be able to edit
Make members of WebGUI's group identified by B<id> be able to edit
the uploaded files. If left unspecified, it defaults to Group ID 4,
(Content Managers).
=item C<--groupToView id>
=item B<--groupToView id>
Make members of WebGUI's group identified by C<id> be able to view
Make members of WebGUI's group identified by B<id> be able to view
the uploaded files. If left unspecified, it defaults to Group ID 7,
(Everybody).
=item C<--owner id>
=item B<--owner id>
Make WebGUI's user identified by C<id> own the uploaded files. If
Make WebGUI's user identified by B<id> own the uploaded files. If
left unspecified, it defaults to User ID 3 (Admin).
=item C<--webUser username>
=item B<--webUser username>
The system user that your web server runs as. If left unspecified
it will default to C<www-data>.
it will default to B<www-data>.
=item C<--override>
=item B<--override>
This flag will allow you to run this utility without being the super user,
but note that it may not work as intended.
=item C<--skipOlderThan interval>
=item B<--skipOlderThan interval>
Skip files older than C<interval> seconds. If left unspecified, it
Skip files older than B<interval> seconds. If left unspecified, it
will default to skip no files.
=item C<--findByExt patterns>
=item B<--findByExt patterns>
Import only those files with matching file extensions. C<patterns>
Import only those files with matching file extensions. B<patterns>
is a list of comma-separated extensions to match. If left unspecified,
it will default to import all files.
=item C<--recursive>
=item B<--recursive>
Import files recursively. If left unspecified, only files in the
folder will be imported, without following subfolders.
=item C<--overwrite>
=item B<--overwrite>
Overwrite any matching file URL with the new file rather than
creating a new Asset for the file. Instantiate the existing asset
and replace the file.
=item C<--ignoreExtInName>
=item B<--ignoreExtInName>
Do not include the filename extension in the Title and menuTitle
database fields.
=item C<--quiet>
=item B<--quiet>
Disable all output unless there's an error.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

28
sbin/generateContent.pl
View file

@ -106,39 +106,39 @@ the generated content.
=over
=item C<--configFile config.conf>
=item B<--configFile config.conf>
The WebGUI config file to use. Only the file name needs to be specified,
since it will be looked up inside WebGUI's configuration directory.
This parameter is required.
=item C<--assetId id>
=item B<--assetId id>
Generate content for WebGUI's Asset identified by C<id>. Either this
parameter or C<--url> must be supplied.
Generate content for WebGUI's Asset identified by B<id>. Either this
parameter or B<--url> must be supplied.
=item C<--url url>
=item B<--url url>
Generate content for WebGUI's Asset located at C<url>, which must be
relative to the server (e.g. C</home> instead of C<http://your.server/home>).
Either this parameter or C<--assetID> must be supplied.
Generate content for WebGUI's Asset located at B<url>, which must be
relative to the server (e.g. B</home> instead of B<http://your.server/home>).
Either this parameter or B<--assetID> must be supplied.
=item C<--styleId id>
=item B<--styleId id>
Use the WebGUI style specified by the AssetID C<id>. If left unspecified,
Use the WebGUI style specified by the AssetID B<id>. If left unspecified,
it defaults to using the Asset's default style.
=item C<--toFile pathname>
=item B<--toFile pathname>
Send generated content to the specified filename. If left unspecified,
content is sent to standard output.
=item C<--userId id>
=item B<--userId id>
Set a specific WebGUI user to act as content viewer. If left unspecified,
defaults to C<1> (Visitor).
defaults to B<1> (Visitor).
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

14
sbin/maintenanceMode.pl
View file

@ -57,27 +57,27 @@ maintenanceMode --help
=head1 DESCRIPTION
This utility script will set or unset WebGUI's C<specialState>
This utility script will set or unset WebGUI's B<specialState>
setting to signal the beginning or end of Maintenance Mode.
=over
=item C<--configFile config.conf>
=item B<--configFile config.conf>
The WebGUI config file to use. Only the file name needs to be specified,
since it will be looked up inside WebGUI's configuration directory.
This parameter is required.
=item C<--start>
=item B<--start>
Set C<specialState> to signal the beginning of maintenance mode.
Set B<specialState> to signal the beginning of maintenance mode.
This is the default behaviour.
=item C<--stop>
=item B<--stop>
Unset C<specialState> to signal the end of maintenance mode.
Unset B<specialState> to signal the end of maintenance mode.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

10
sbin/migrateCollabToGallery.pl
View file

@ -110,28 +110,28 @@ migrateCollabToGallery --help
=head1 DESCRIPTION
This WebGUI utility script migrates a collaboration system's threads
into gallery albums. It uses C<WebGUI::Utility::Gallery> for its major
into gallery albums. It uses B<WebGUI::Utility::Gallery> for its major
features.
=over
=item C<--configFile config.conf>
=item B<--configFile config.conf>
The WebGUI config file to use. Only the file name needs to be specified,
since it will be looked up inside WebGUI's configuration directory.
This parameter is required.
=item C<collab>
=item B<collab>
A WebGUI's Collaboration System URL or Asset ID. If an URL is given,
it must be an absolute URL beginning with a slash.
=item C<gallery>
=item B<gallery>
A WebGUI's Gallery URL or Asset ID. If an URL is given, it must be
an absolute URL beginning with a slash.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

2
sbin/migrateFolderToGallery.pl
View file

@ -133,6 +133,6 @@ The WebGUI config file to use.
=head1 DESCRIPTION
This script migrates a Folder into a gallery album. It
uses C<WebGUI::Utility::Gallery> for its major features.
uses B<WebGUI::Utility::Gallery> for its major features.

4
sbin/purgeWGAccess.pl
View file

@ -55,13 +55,13 @@ removes it.
=over
=item C<--configFile config.conf>
=item B<--configFile config.conf>
The WebGUI config file to use. Only the file name needs to be specified,
since it will be looked up inside WebGUI's configuration directory.
This parameter is required.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

6
sbin/rebuildLineage.pl
View file

@ -154,17 +154,17 @@ out of order in your navigation.
=over
=item C<--configFile config.conf>
=item B<--configFile config.conf>
The WebGUI config file to use. Only the file name needs to be specified,
since it will be looked up inside WebGUI's configuration directory.
This parameter is required.
=item C<--quiet>
=item B<--quiet>
Disable all output unless there's an error.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

20
sbin/search.pl
View file

@ -159,40 +159,40 @@ build the index only for new content, and perform searches.
=over
=item C<--configFile config.conf>
=item B<--configFile config.conf>
The WebGUI config file to use. Only the file name needs to be specified,
since it will be looked up inside WebGUI's configuration directory.
This parameter is required.
=item C<--indexsite>
=item B<--indexsite>
Reindexes the entire site specified in the config file. This process
may take a while (even hours) depending on the amount of content the
site has. Server performance will suffer somewhat during the
indexing process. This option requires a C<--configFile> to be
indexing process. This option requires a B<--configFile> to be
specified.
=item C<--updatesite>
=item B<--updatesite>
Indexes content that has not be indexed for the site specified in
the config file, keeping the indexes for already indexed content
intact. This is useful if the C<--indexsite> had to be stopped
partway through. This option requires a C<--configFile> to be
intact. This is useful if the B<--indexsite> had to be stopped
partway through. This option requires a B<--configFile> to be
specified.
=item C<--search text>
=item B<--search text>
Searches the site specified in the config file for a given keyword or
phrase, returning the results. This option requires a C<--configFile>
phrase, returning the results. This option requires a B<--configFile>
to be specified.
=item C<--indexall>
=item B<--indexall>
Reindexes B<all> the sites. Note that this can take many hours and
will affect performance of the server during the indexing process.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

26
sbin/spectre.pl
View file

@ -151,32 +151,32 @@ S.P.E.C.T.R.E. is the Supervisor of Perplexing Event-handling
Contraptions for Triggering Relentless Executions. It triggers
WebGUI's workflow and scheduling functions.
Spectre's configuration file, C<spectre.conf>, is located under
Spectre's configuration file, B<spectre.conf>, is located under
the WebGUI filesystem hierarchy.
=over
=item C<--daemon>
=item B<--daemon>
Starts the Spectre server forking as a background daemon. This
can be done by hand, but it is usually handled by a startup
script.
=item C<--run>
=item B<--run>
Starts Spectre in the foreground without forking as a daemon.
=item C<--debug>
=item B<--debug>
If this option is specified at startup either in C<--daemon>
or C<--run> mode, Spectre will provide verbose debug to standard
If this option is specified at startup either in B<--daemon>
or B<--run> mode, Spectre will provide verbose debug to standard
output so that you can see exactly what it's doing.
=item C<--shutdown>
=item B<--shutdown>
Stops the running Spectre server.
=item C<--ping>
=item B<--ping>
Pings Spectre to see if it is alive. If Spectre is alive, you'll get
confirmation with a message like
@ -188,16 +188,16 @@ If Spectre doesn't seem to be alive, you'll get a message like
Spectre is not responding.
Unable to connect to <IP-address>:<Port>
where C<IP-address> is the IP address and C<Port> is the port number
where B<IP-address> is the IP address and B<Port> is the port number
where Spectre should be listening for connections on according to
C<spectre.conf>.
B<spectre.conf>.
=item C<--status>
=item B<--status>
Shows a summary of Spectre's internal status. The summary contains
a tally of suspended, waiting and running WebGUI Workflows.
=item C<--test>
=item B<--test>
Tests whether Spectre can connect to WebGUI. Both Spectre
and the Apache server running WebGUI must be running for this
@ -205,7 +205,7 @@ option to work. It will test the connection between every site
and Spectre, by looking for configuration files in WebGUI's
configuration directory, showing success or failure in each case.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

16
sbin/testCodebase.pl
View file

@ -82,8 +82,8 @@ testCodebase - Test WebGUI's code base.
=head1 DESCRIPTION
This WebGUI utility script tests all of WebGUI's installed code base
using a particular confiuration file. It uses C<prove> to run all
the WebGUI supplied test routines, located in the C<t> subdirectory
using a particular confiuration file. It uses B<prove> to run all
the WebGUI supplied test routines, located in the B<t> subdirectory
of the WebGUI root.
You should B<NOT> use a production config file for testing, since some
@ -91,32 +91,32 @@ of the test may be destructive.
=over
=item C<--configFile config.conf>
=item B<--configFile config.conf>
The WebGUI config file to use. Only the file name needs to be specified,
since it will be looked up inside WebGUI's configuration directory. Be
aware that some of the tests may be destructive. This parameter is required.
=item C<--coverage>
=item B<--coverage>
Turns on additional L<Devel::Cover> based coverage tests. Note that
this can take a long time to run.
=item C<--noLongTests>
=item B<--noLongTests>
Prevent long tests from being run
=item C<--perlBase path>
=item B<--perlBase path>
Specify a path to an alternative Perl installation you wish to use for the
tests. If left unspecified, it defaults to the Perl installation in the
current PATH.
=item C<--verbose>
=item B<--verbose>
Turns on additional information during tests.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

4
sbin/testEnvironment.pl
View file

@ -409,12 +409,12 @@ L<http://update.webgui.org>, and compare with the currently installed one.
=over
=item C<--simpleReport>
=item B<--simpleReport>
Prints the status report to standard output, but does not attempt
to upgrade any outdated or missing Perl modules.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

10
sbin/thumbnailer.pl
View file

@ -143,22 +143,22 @@ for image transformations.
=over
=item C<--path path>
=item B<--path path>
Specifies the absolute C<path> to WebGUI's uploads directory.
Specifies the absolute B<path> to WebGUI's uploads directory.
This parameter is required.
=item C<--size thumbSize>
=item B<--size thumbSize>
Specify the size in pixels of the largest dimension of the thumbanils.
If left unspecified, it defaults to 50 pixels.
=item C<--missing>
=item B<--missing>
Use this option to create thumbnails only for those images that are
missing thumbnails.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

30
sbin/upgrade.pl
View file

@ -384,7 +384,7 @@ WebGUI libraries and programs.
This utility is designed to be run as a superuser on Linux systems,
since it needs to be able to access several system directories
and change ownership of files. If you want to run this utility without
superuser privileges, use the C<--override> option described below.
superuser privileges, use the B<--override> option described below.
=head1 WARNING
@ -400,60 +400,60 @@ upgrade.
=over
=item C<--doit>
=item B<--doit>
You B<MUST> include this flag in the command line or the script
will refuse to run. This is to force you to read this documentation
at least once and be sure that you B<REALLY> want to perform the
upgrade.
=item C<--backupDir path>
=item B<--backupDir path>
Specify a path where database backups should be created during the
upgrade procedure. If left unspecified, it defaults to C</var/backups>.
upgrade procedure. If left unspecified, it defaults to B</var/backups>.
=item C<--history>
=item B<--history>
Displays the upgrade history for each of your sites. Running with this
flag will B<NOT> perform the upgrade.
=item C<--mysql pathname>
=item B<--mysql pathname>
The full pathname to your mysql client executable. If left unspecified,
it defaults to C</usr/bin/mysql>.
it defaults to B</usr/bin/mysql>.
=item C<--mysqldump pathname>
=item B<--mysqldump pathname>
The full pathname to your mysqldump executable. If left unspecified,
it defaults to C</usr/bin/mysqldump>.
it defaults to B</usr/bin/mysqldump>.
=item C<--override>
=item B<--override>
This flag will allow you to run this utility without being the super user,
but note that it may not work as intended.
=item C<--skipBackup>
=item B<--skipBackup>
Use this if you B<DO NOT> want database backups to be performed
during the upgrade procedure.
=item C<--skipDelete>
=item B<--skipDelete>
The upgrade procedure normally deletes WebGUI's cache and temporary files
created as part of the upgrade. This cleanup is very important during
large upgrades, but can make the procedure quite slow. This option
skips the deletion of these files.
=item C<--skipMaintenance>
=item B<--skipMaintenance>
The upgrade procedure normally puts up a simple maintenance page on all
the sites while running, but this option will skip that step.
=item C<--quiet>
=item B<--quiet>
Disable all output unless there's an error.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.

94
sbin/userImport.pl
View file

@ -272,11 +272,11 @@ overriding values from the file.
This utility is designed to be run as a superuser on Linux systems,
since it needs to be able to put files into WebGUI's data directories
and change ownership of files. If you want to run this utility without
superuser privileges, use the C<--override> option described below.
superuser privileges, use the B<--override> option described below.
The user information is given in a simple TAB-delimited text file,
that describes both the field names and field data for each user. You
can change de actual delimiter with the C<--delimiter> option (see below).
can change de actual delimiter with the B<--delimiter> option (see below).
The first line of the file contains the field names whose values are
going to be loaded. From then on, all non-blank lines in the file must have
@ -285,28 +285,28 @@ names are:
=over
=item C<username>
=item C<password>
=item C<authMethod>
=item C<status>
=item C<ldapUrl>
=item C<connectDN>
=item C<groups>
=item C<expireOffset>
=item B<username>
=item B<password>
=item B<authMethod>
=item B<status>
=item B<ldapUrl>
=item B<connectDN>
=item B<groups>
=item B<expireOffset>
=item Any valid User Profile field name available in WebGUI's database,
e.g. C<firstName>, C<lastName>, C<mail>, etc.
e.g. B<firstName>, B<lastName>, B<mail>, etc.
=back
If you use the field C<groups>, each following line should contain a comma
If you use the field B<groups>, each following line should contain a comma
separated list of WebGUI Group Ids; note that this could be a problem
if you chose to use comma as a delimiter for fields.
If no username is specified it will default to C<firstName.lastName>. If
no C<username> is specified, nor C<firstName> and C<lastName>, then the
If no username is specified it will default to B<firstName.lastName>. If
no B<username> is specified, nor B<firstName> and B<lastName>, then the
user will B<not> be loaded.
If you specify the C<userId> field for import on any record, that C<userId>
If you specify the B<userId> field for import on any record, that B<userId>
will be used instead of generating a new one automatically. If you do this,
be careful not to insert duplicates!
@ -314,106 +314,106 @@ If you use an invalid field name, its values will be ignored.
=over
=item C<--configFile config.conf>
=item B<--configFile config.conf>
The WebGUI config file to use. Only the file name needs to be specified,
since it will be looked up inside WebGUI's configuration directory.
This parameter is required.
=item C<--usersFile pathname>
=item B<--usersFile pathname>
Pathname to the file containing users information for bulk loading.
=item C<--authMethod method>
=item B<--authMethod method>
Specify the default authentication method to set for each loaded user.
It can be overridden in the import file for specific users.
If left unspecified, it defaults to C<WebGUI>.
If left unspecified, it defaults to B<WebGUI>.
=item C<--canChangePass>
=item B<--canChangePass>
Set loaded users to be able to change their passwords. If left
unspecified, loaded users will B<NOT> be able to change their
passwords until and administrator grants them the privilege.
=item C<--delimiter string>
=item B<--delimiter string>
Specify the string delimiting fields in the import file. If left
unspecified, it defaults to a single TAB (ASCII 9).
=item C<--expireOffset integer>
=item B<--expireOffset integer>
Specify the default amount of time before the loaded user will be
expired from the groups they are added to. The units are specified
by C<--expireUnits> (see below). It can be overridden in the import
by B<--expireUnits> (see below). It can be overridden in the import
file for specific users. If left unspecified, it defaults to the
expire offset set in the group definition within WebGUI.
=item C<--expireUnits unidades>
=item B<--expireUnits unidades>
Specify the units for C<--expireOffset> (see above). Valid values
are C<seconds>, C<minutes>, C<hours>, C<days>, C<weeks>, C<months>,
C<years>, C<epoch>, or C<fixed>. If set to C<epoch> the system will
Specify the units for B<--expireOffset> (see above). Valid values
are B<seconds>, B<minutes>, B<hours>, B<days>, B<weeks>, B<months>,
B<years>, B<epoch>, or B<fixed>. If set to B<epoch> the system will
assume that the expire offset should be taken as an epoch date
(absolute number of seconds since January 1, 1970) rather than an
interval. If set to C<fixed> the system will assume that the
C<--expireOffset> is a fixed date. If left unspecified, it defaults
to C<seconds>.
interval. If set to B<fixed> the system will assume that the
B<--expireOffset> is a fixed date. If left unspecified, it defaults
to B<seconds>.
=item C<--groups groupid,...>
=item B<--groups groupid,...>
Specify a comma separated list of WebGUI Group Ids that each loaded
user will be set to. It can be overridden in the import file for
specific users.
=item C<--ldapUrl uri>
=item B<--ldapUrl uri>
Specify the URI used to connect to the LDAP server for authentication.
The URI must conform to what L<Net::LDAP> uses for connecting.
It can be overridden in the import file for specific users.
=item C<--password string>
=item C<--identifier string>
=item B<--password string>
=item B<--identifier string>
Specify the default password to use for loaded users. It can (and should)
be overriden in the import file for specific users. If left unspecified,
it defaults to C<123qwe>.
it defaults to B<123qwe>.
=item C<--status status>
=item B<--status status>
Specify the default account status for loaded users. Valid values are
C<Active> and C<Deactivated>. If left unspecified, it defaults to
C<Active>.
B<Active> and B<Deactivated>. If left unspecified, it defaults to
B<Active>.
=item C<--update>
=item B<--update>
Search WebGUI's database for each user listed in the import file, and
update its information using the provided fields. Users in the import
file that are B<not> found in the database are B<ignored>. See
C<--updateAdd> below if you want to add the extra users.
B<--updateAdd> below if you want to add the extra users.
=item C<--updateAdd>
=item B<--updateAdd>
Search WebGUI's database for each user listed in the import file, and
update its information using the provided fields. Users in the import
file that are B<not> found in the database are B<added>. See
C<--update> above if you do not want to add the extra users.
B<--update> above if you do not want to add the extra users.
=item C<--replaceGroups>
=item B<--replaceGroups>
If the user being updated with C<--update> or C<--updateAdd> already
If the user being updated with B<--update> or B<--updateAdd> already
belongs to some other groups, remove the user from them.
=item C<--override>
=item B<--override>
This flag will allow you to run this utility without being the super user,
but note that it may not work as intended.
=item C<--quiet>
=item B<--quiet>
Disable all output unless there's an error.
=item C<--help>
=item B<--help>
Shows this documentation, then exits.